Power Off the Printer:
Turn off your printer and discconet the AMS from printers
Open the AMS Hub Cover:
Carefully remove the AMS Hub cover by unscrewing two screw M3 to access the internal components.
Push down coupler to take out the PTFE tube
Gently take out the AMS system:
Locate the Stuck Filament:
Identify where the filament is jammed/stucked and use the puch coupler to take out PTFE tube
Take out the annoying filament ;(
How to Remove Stuck Filament from the AMS Hub: Print
Modified on: Tue, 4 Feb, 2025 at 1:05 PM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.