Wanhao Duplicator 4 series
The nozzle should be leveled but if not, this how to do it.
Tue, 3 Nov, 2015 at 4:09 PM
One of the axis behave weird, does not answer or move badly.
Tom make sure what could be the issue.
1. Swap cable to a stepper motor that is workin...
Tue, 3 Nov, 2015 at 4:47 PM
Duplicator 4, 4X, an 4S Might Board layout
Fri, 20 Nov, 2015 at 11:21 AM