3D Prima Technical support

Creality Space π Plus Filament Dryer (Error) 1

• Creality Space π Plus Filament Dryer (Error)

Wanhao Duplicator 4 series 3

• How to level MK10 extruder nozzle difference
• Wanhao Duplicator 4 series: One of the axis behave weird, does not answer or move badly
• Duplicator 4, 4X, an 4S Might Board layout

Wanhao Duplicator 5 Series 3

• My Duplicator 5S does not start when power on
• Why Don't I Have A Lower Z-Axis Endstop Switch On My D5S
• How to fix the shifting issue in D5S printer

Wanhao Duplicator i3 12

• Nozzle does not heat up
• The power switch is stuck
• Display shows "DEF"
• How to replace cooling fan and themistor
• How to deal with i3 extruder filament stuck

View all 12

Wanhao Duplicator 6 5

• How to take out the build platform arm
• The build plate does not move
• The extruder makes a "clicking" sound
• The temperature is too high on the build plate
• How to fix D6 warning: “ERROR stopped, Z switch broken”

Wanhao Duplicator i3 Plus 3

• Important information about Duplicator i3 Plus
• How to solve the issue with bad sounds from the build plate
• Change voltage on Wanhao Duplicator i3 Plus

Wanhao Duplicator i3 Plus Mark II 3

• Adjust the ABL sensor and level the bed
• How to use the auto bed leveling function
• How to update the firmware

Wanhao Duplicator 9 Plus 1

• Firmware update

Wanhao Duplicator 7 1

• Creation Workshop 54

Flashforge Guider IIS / 2S 1

• Thermometer Symbol

Wanhao Duplicator 12 1

• Wanhao D12 LCD does not turn on

Creality CR-6 SE 1

• CR-6 SE Firmware + LCD Update after mainboard replacement (4.5.3)

Anet ET4 / ET5 1

• Auto-leveling issues

Ender 5 / 5 Pro 1

• Ender 5 - Z axis steps/mm issue

Ender 3/3 Pro 1

• Printer Beeps and stuck at 'Ender' logo

PrimaCreator P120 V4 2

• How to replace PrimaCreator P120 V4 LCD
• Replacement Guide - Replacing the Hotend Fan P120

Raise Pro 3 Guides 1

• RAISE3D PRO3/PRO 3 PLUS EXTRUDER CONTROLLER BOARD UPDATE

Flashforge Adventure 4 1

• Updating to Adventure 4 High Speed Nozzle

Creality CR-10 Smart Pro 1

• Colorchange/ Filament Runout CR-10 Smart Pro Guide

Creality K1/ K1 Max 6

• K1/K1 Max Motion System + Toolhead Replacement Important Info
• K1 Max XY-Motor Replacement
• Bed Leveling Adjustment - K1/ K1 Max
• K1 Max Replace Top Frame
• K1 Replace USB Board Guide

View all 6

BIQU Hurakan 1

• BIQU Hurakan OS Flashing/ Imaging Guide + Info

Creality Ender-3 V3 SE / KE 2

• Replace Hotend Fan - Creality Ender-3 V3 KE
• Creality Ender-3 V3 SE/KE Standoff Locations

Artillery Sidewinder X3 Pro 1

• Replacing a Z-motor / Sidewinder X3 Pro

LokLik Crafter 2

• LokLik Crafter Disassembly Guide
• LokLik Crafter Not Starting

Creality Space π Filament Dryer 4

• Creality Space π Filament Dryer Screen Replacement
• Creality Space π Filament Dryer Mainboard Replacement
• Creality Space π Filament Dryer Blower Fan Replacement
• Creality Space π Filament Dryer Heater Replacement