Wanhao Duplicator i3
Wanhao Duplicator i3: Nozzle does not heat up
In the latest revision of the Wanhao i3 it has been discovered that there is a design defect. It´s cau...
Fri, 20 Nov, 2015 at 11:13 AM
The i3 LCD screen indicate “DEF” on before the target temperature. That is to say the thermistor
has problem. Either the translucent insulate tube was brok...
Fri, 20 Nov, 2015 at 11:14 AM
This video show you how to replace the filament cooling fan, extruder cooling fan and themistor.
Fri, 20 Nov, 2015 at 11:14 AM
You can either disassemble the extruder and pull the filament out. Or you can push the filament out while heating the extruder. You do not need to take of t...
Fri, 20 Nov, 2015 at 11:14 AM
Some customer found after printing some while the Wanhao i3 print shift. And this is caused by the loosing set screw on the timing gear. By tighten these se...
Fri, 20 Nov, 2015 at 11:14 AM
One of the axis behave weird, does not answer or move badly.
Tom make sure what could be the issue.
1. Swap cable to a stepper motor that is wor...
Fri, 20 Nov, 2015 at 11:14 AM
How to add a glass plate to platform for Wanhao Duplicator i3
Fri, 20 Nov, 2015 at 11:15 AM
Problem with USB connection to your Duplicator i3
1. You need to set the baudrate to 115200.
The printer can not connect to the computer directly...
Fri, 20 Nov, 2015 at 11:15 AM
The MK10 extruder just makes a "clicking" sound
Wed, 31 Aug, 2016 at 8:45 AM