Wanhao Duplicator 5 Series
My Duplicator 5S does not start when power on.
To avoid damage to the mainboard, there is a protection screw on your D5S series micro-controller (check pi...
Fri, 20 Nov, 2015 at 10:36 AM
Why Don't I Have A Lower Z-Axis Endstop Switch On My D5S
Wanhao made a change and no longer put on a lower z axis endstop switch.
If you are...
Fri, 20 Nov, 2015 at 11:12 AM
Open the attached PDF file and follow the instructions.
Mon, 23 Nov, 2015 at 10:06 AM