Creality K1/ K1 Max
TABLE OF CONTENTS Motion system (replacing bearing for example) Hotend attachment to toolhead Temporary post-repair freeze phenomenon Motion system...
Mon, 8 Apr, 2024 at 8:30 AM
Information: This guide covers how to replace a left or right Core-XY motor on a K1 Max which will require removing the top frame. There are lots of screw...
Tue, 2 Apr, 2024 at 3:58 PM
Introduction: Here is a wiki guide from Creality covering troubleshooting on both K1 and K1 Max: https://wiki.creality.com/en/k1-flagship-series/k1-ser...
Mon, 21 Oct, 2024 at 3:24 PM
Information: This tutorial covers removing the top metal frame peice on the K1 Max. There are lots of screws to undo although most are one of two types wit...
Mon, 18 Mar, 2024 at 9:17 AM
Information: This guide outlines the steps to replace the USB adapter board on a Creality K1 3D Printer. Ensure the machine is powered off and unplugged b...
Thu, 4 Apr, 2024 at 2:44 PM
Introduction: Creality has updated the mainboards for their K1 Max 3D printers to accommodate a change in the X/Y axis motor size. This change has resulted...
Wed, 20 Nov, 2024 at 10:19 AM