Creality K2/Plus
Solutions to most K2-Problems.
If you get the "FR2849" error on your Creality CFS or if it has trouble pushing the filament past the CFS hub then it might be that the filament s...
Thu, 14 Aug, 2025 at 2:58 PM
How to replace X/Y motor on the K2 Plus/K2 Plus Combo Warning: Unplug the printer for safety 1.Remove the cable from x-motor 2.Unscrew tho...
Mon, 22 Sep, 2025 at 2:21 PM
The estimated time for this is approximately 10 to 15 minutes. Step 1: Turn off the power supply and unplug the power cable! Step 2: Remove th abck ...
Thu, 10 Sep, 2026 at 11:33 AM